BW Series FR Series Membrane Elements
BW series is an aromatic polyamide composite membrane element for desalination of brackish water. It has the characteristics of high water production and good desalination performance. In addition, it has high performance of removing soluble salts, TOC and SiO2, and is especially suitable for the making of high purified water in the electronics and power industries.
It is suitable for desalination treatment of surface water, groundwater, tap water and municipal water with salt content less than 5,000 ppm. It is mainly used for industrial pure water of various scales, boiler feed water of power plants and other industrial water. It can also be used for the treatment of brackish water applications such as high concentration saline waste water and beverage water manufacturing.
FR series, the surface of this membrane was treated by special technology, which changed the electric charge and smoothness of the membrane surface, increased the hydrophilicity of the membrane surface, thus reducing the contamination of pollutants and microorganisms on the membrane surface, and achieving the purpose of reducing the contamination of membrane components and prolonging the service life.
BW series FR series of membrane elements performance:
Model | Active Membrane ft2(m2) | Average Permeate GPD(m3/d) | Stable Rejection | Min. Rejection |
HC-BW-2521 | 16(1.5) | 400(1.5) | 99.7 | 99.5 |
HC-BW-2540 | 33(3.0) | 800(3.0) | 99.7 | 99.5 |
HC-BW-4021 | 42(3.9) | 1100(4.2) | 99.7 | 99.5 |
HC-BW-4040 | 85(7.9) | 2400(9.1) | 99.7 | 99.5 |
HC-BW-8040 | 400(37.2) | 10500(39.7) | 99.7 | 99.5 |
HC-BW-8040-440 | 440(40.9) | 12000(45.4) | 99.7 | 99.5 |
HC-FR-4040 | 400(37.2) | 2400(9.1) | 99.7 | 99.5 |
HC-FR-8040 | 440(40.9) | 10500(39.7) | 99.7 | 99.5 |
BW series FR series of membrane elements Testing Conditions:
Testing Pressure:225 psi (1.5MPa)
Temperature of Testing Solution:25 ℃
Concentration of Testing Solution (NaCl):2000ppm
pH Value of Testing Solution:7.5
Recovery Rate of Single Element:15%
BW series FR series of membrane elements Operation Limits & Conditions:
Max.Working Pressure:600psi(4.14MPa)
Max.Feed Water Flow:75gpm(17 m3/h) for 8040; 16gpm(3.6 m3/h) for 4040,4021; 6.0gpm(1.4 m3/h) for 2521,2540
Max.Feed Water Temperature: 45℃
Max.Mn: 0.1mg/L
Max.Fe: 0.05mg/L
Max.Turbidity NTU: 1.0
Max.Feed Water SDI15: 5
Max.Feed Water COD: 15ppm
Max.Feed Water BOD: 10ppm
Max.Feed Water TOC: 3ppm
Residual Chlorine Concentration of Feed Water: <0.1ppm
pH Range of Feed Water During Continuous Operation: 3~10
Max.Pressure Drop of Single Element: 15psi(0.1MPa) for 8040,4040,2540; 10psi(0.07MPa) for 2521,4021
